Presentation; Warranty; Maintenance; Storage And Transportation Conditions - CefarCompex Rehab 400 Handbuch

II PRESENTATION
ENG

1 - Warranty

This warranty is valid only if accompa-
nied by proof of purchase. Your legal
rights are not affected by this warranty.
Your CefarCompex Rehab 400 stimula-
tor is guaranteed for a period of 2 years
from the date of purchase. The warranty
covers the stimulator (material and
workmanship) but not the battery unit,
cables, or charger. All defects arising
from substandard material or workman-
ship are covered. The warranty does not
cover damage resulting from impact,
accident, improper use, insufficient
protection against damp, immersion
in water, or repair work conducted by
unauthorized personnel.

2 - Maintenance

• Clean with a soft cloth and an
alcohol-based, solvent-free cleaning
product. Use only a minimum amount
of liquid when cleaning the unit.
• Do not disassemble the stimulator or
charger as these all contain high-volt-
age components that could cause
electric shock. This may only be done
by persons or repair services author-
ized by CefarCompex.
• Your stimulator does not require
calibration. If your stimulator contains
parts that seem worn or defective,
please contact your nearest Cefar-
Compex customer service centre
regarding an upgrade.
• Medical and health professionals are
obliged to service the unit in compli-
ance with relevant national laws and
regulations. This involves testing
performance and safety parameters at
regular intervals.
6
3 - Storage and transporta-
tion conditions
The Rehab 400 contains rechargeable
batteries and so the storage and trans-
portation conditions must not exceed
the following figures:
• Storage and transportation tempera-
ture: -20°C to 45°C
• Maximum relative humidity: 75%
• Atmospheric pressure: 700 hPa to
1060 hPa

4 - Usage conditions

Temperature: 0°C to 40°C
Relative humidity: 30% to 75%
Atmospheric pressure: 700 hPa to 1060 hPa.
Do not use in an explosion risk area.

5 - Elimination

Batteries must be disposed in compli-
ance with relevant national regulatory
requirements.
Any products bearing the WEEE mark-
ing (a crossed-out wheeled bin) must
be separated from ordinary household
waste and sent to special collection
facilities for recycling and recovery.