Battery Status And Recharging; A) Battery Status; B) Recharging - CefarCompex Physio 5 Bedienungsanleitung

ENG
22a
22a: Press the On/Off button to return to
the previous screen.
22b: Use the channel 1 +/- button to
select the parameter you wish to edit:
pulse width for each channel, period, or
programme duration.
22c: Use the channel 2 +/- button to edit
the value of the parameter you have
selected.
22e: Press the channel 4 +/- button
to confirm your choice and start the
treatment.
Partial manual
Partial denervation with choice of
stimulation parameters to define the
desired ramp.
To use a ramp of your choice, first
select the pulse width option in the
corresponding channel. Confirm your
choice and increase the stimulation
intensity to the desired level.
23a
23a: Press the On/Off button to return to
the previous screen.
23b: Use the channel 1 +/- button to
select the parameter you wish to edit:
pulse width for each channel, period, or
programme duration.
23c: Use the channel 2 +/- button to edit
the value of the parameter you have
selected.
23e: Press the channel 4 +/- button
to confirm your choice and start the
treatment.
15
22b 22c 22e
23b 23c 23e
7 - Battery status and
recharging
Never recharge the stimulator without
first disconnecting the stimulation
cables.
Never recharge the battery with a
charger other than that supplied by
CefarCompex.
The Physio5 is powered by a
rechargeable battery unit. The battery's
duration varies according to the
programmes and stimulation energies
used. We strongly recommend you to
fully charge the battery before using
it for the first time as this will extend
battery duration and life time. If you do
not use your stimulator for long periods
of time, remember to recharge the
battery regularly or to store it outside
the stimulator.

A) Battery status

The status of the battery is indicated
by a battery icon on the screen. If the
battery icon does not contain any lines,
this means that power is running low.
Do not start a session before recharging
the unit.
If the START symbol normally displayed
above the channel 4 +/- button is not
visible and the battery icon is flashing,
this means that the battery is completely
discharged. The stimulator can no longer
be used. Recharge it immediately.

B) Recharging

See chapter V, section 2, letter C
"Charging".