B) Recharging; Troubleshooting - CefarCompex Rehab 400 Handbuch

B) Recharging

ENG
Remove all stimulation cables from the
stimulator before recharging it. Connect
the charger to the mains and then con-
nect the stimulator to the charger. The
charge menu shown below will automati-
cally appear on the screen.
The duration of the recharging operation
is displayed on the screen. The charger
supplied with the stimulator fully
recharges the stimulator within 2-2,5
hours.
The battery icon is animated while
the battery is recharging. When fully
charged, the icon will be full and the
total time taken to recharge the battery
will flash on the screen. Simply discon-
nect the charger and the Rehab 400 will
turn off automatically.
16

6 - Troubleshooting

Electrode error
The Rehab 400 will beep and alternately
display a pair of electrodes and an ar-
row pointing to the channel where the
problem was detected. In the example
above, the stimulator has detected an
error in channel 2.
The electrode error message can mean
that:
• there are no electrodes connected to
this channel,
• the electrodes are old, worn, and/
or the contact is poor: try using new
electrodes,
• the electrode cable is faulty: try con-
necting it to another channel. If the
problem persists, replace the cable.
If for any reason yor device seems to
present a malfunction other than those
presented above, please contact Cefar-
Compex customer service.