Panasonic WV-Q169E Handbuch Seite 7

Screws of the main camera body
Note: The mount bracket supplied with
the camera is not used.
r Mount the camera enclosure on the cam-
era main body.
<Installing WV-CW504S, WV-CW500S,
WV-NW502S>
q Mount the camera attachment (supplied
with the camera) to this bracket.
Use 4 M4-L8 screws (supplied with the
camera) to secure the camera attach-
ment firmly as shown in the drawing.
(Recommended tightening torque: 0.78
N·m {0.58 lbf·ft})
Ceiling mount
bracket
Screw
holes
Bracket
Camera
attachment
w Connect the camera cables.
e Align the "OPEN" mark of the camera
with the protrusion of the camera attach-
ment.
Protrusion
Engage the camera with the camera
attachment.
M4-L8 screw
LOCK OP EN
7