Mounting Or Removing The Table; Mounting Or Removing The Foot Bracket - Vermeiren Elios Gebrauchsanweisung

The adjustment of the belt shall be with the plastic adjustment system c mounted on the
belt.
2.6

Mounting or removing the table

WARNING:
Risk of injury – Do not exceed the maximum load of 3 kg.
   
WARNING:
    Risk of injury – Check that the table is attached correctly.
Adjusting the table:
1. Loosen the lock system e on both sides.
2. Move the table in the grooves f until the desired position is reached.
3. Push the lock system e on both sides, in the grooves f of the shell chair, to attach the
table.
4. Check that the table is attached correctly.
2.7

Mounting or removing the foot bracket

WARNING:
Risk of injury – Check that the foot bracket is attached correctly.
   
1. Pull the belt through the adjustment system
c.
Mounting the table:
1. Place the table c on the armrests d.
2. Push the lock system e on both
sides, in the grooves f of the shell
chair, to attach the table.
3. Check that the table is attached
correctly.
Removing the table:
1. Loosen the lock system e on both
sides.
2. Remove the table c.
Mounting the foot bracket:
1. Hold the foot bracket d against the
plate e.
2. Place the screw c in the hole.
3. Check that the foot bracket is
attached correctly.
Removing the foot bracket:
1. Remove the screw c.
2. Remove the foot bracket d.
ƒ‰‡
Elios
2012-07