SOHARD SH ARC-PCIu Handbuch Seite 30

Handbuch / Manual
11.1.5 Twisted-pair Interface (TWP)
Data rate
Bus termination
Output peak voltage
Ouput pulse shape
Cabling
Connector
11.1.6 Optic Fiber Interfaces ST and SMA (LWLST / LWLSMA)
Data rate
Optical input power
Peak output power
Peak power wavelength
Cabling
Connector
11.1.7 Optic Fiber Interface TOSLINK (LWLTOS)
Data rate
Optical input power:
Peak output power:
Peak power wavelength:
Connector:
30
2.5 Mbit/s
120 ohm (internal termination disabled
by default)
min. 16 V on terminated 93 ohm line
Sine dipulse 200 ns (see Sec. 'Coaxial
Interface')
Twisted pair wire with Z = 120 ohm is
recommended
Shielded RJ45 socket
up to 2.5 Mbit/s
min. − 25 dBm, max. − 9.2 dBm
typ -14 dBm when coupled in 50 µm
fiber, four grades selectable: very low,
low (default), medium, high
820 nm
Fiber types (values in µm) 50/125 or
62.5/125 or 100/140
LWLST: 2 ST/BFOC sockets
LWLSMA: 2 FSMA sockets
up to 2.5 Mbit/s
min. −31 dBm, max. −14 dBm
min. −20 dBm, max. −14 dBm when
coupled in 200 µm fiber, four grades
selectable: very low, low (default),
medium, high
800 nm
TODX296, mating with CF-2071,
TOCP200Q and TOCP200X