Accessing Registers - SOHARD SH ARC-PCIu Handbuch

DIP switch:
Switch 1 Switch 2
ON
ON
OFF
OFF
Note: Please take care that each identification code is assigned only once
in a system!

8.2 Accessing registers

The SH ARC-PCIe, SH ARC-PCIu and SH ARC-PCI104 are automatically
mapped into the I/O and memory space by the BIOS of the system. The
resources reserved can be determined by using functions of the operating
system.
The PCI parameters are as follows:
SUBSYSTEM ID
SUBSYSTEM VENDOR ID
When SOHARD drivers are applied the card will be automatically
detected by the system.
identification
ON
OFF
ON
OFF
DEVICE ID = 0x9030
VENDOR ID = 0x10B5
CLASS CODE = 0x0280
= 0x2978
= 0x10B5
Card
0 presetting
1
2
3
Handbuch / Manual
Code
19