Safety Instructions; Warnings And Instructions; Installation; To Ensure Electro-Magnetic Compatibility - SOHARD SH ARC-PCIu Handbuch

6 Safety Instructions

The following safety instructions for installation and operation are to be
followed for safe operation and electro-magnetic compatibility of the
device.

6.1 Warnings and Instructions

Read these safety instructions carefully before installing and operating
the device. Keep these safety instructions, regard the warnings and follow
the instructions.

6.2 Installation

The device must only be used in industrial environments. It must only be
mounted in and operated within PCs with casings according
to EN 60950-1.

6.3 To ensure Electro-magnetic compatibility

a) Only attach shielded cables and shielded connectors to the ARCNET
connector.
b) Only use bit rates which are specified by SOHARD for the actual
transfer mode.
c) Only use original interface modules by SOHARD for modular cards.
d) Only use PC casings with intact and complete shielding. Unused slots
must be closed appropriately.

6.4 Ventilation

Only mount the device in a way so that adequate ventilation is ensured.

6.5 Temperature

Only store and operate the device within the specified temperature
ranges.
Handbuch / Manual
17