Inhaltsverzeichnis
Werbung
UK
1
Bærerem
D
Kontroller maskinen, løsdele og tilbehør for transportskade.
Komponenter
NL
Fig. 1
1.
Holdegreb
2.
Ekstra greb
F
3.
Ledning
4.
Ledningskrog
5.
Afbryder
E
6.
Hastighedsregulering (kun model 2400 Watt)
7.
Øvre sugerør
8.
Nedre sugerør
P
9.
Pose
10. Indgangsrør pose
11. Kant (for at sætte posen på)
I
12. Blæse/suge valggreb
13. Lås
14. Ventilationshuller
S
15. Hjul
16. Bærerem
SF
2. SIKKERHEDSFORSKRIFTER
N
Beskrivelse af symboler
DK
Læs instruktionerne omhyggeligt.
I overensstemmelse med grundlæggende sikkerhedsstandarder i de europæiske
direktiver.
Klasse II maskine – Dobbelt isolering – Du behøver ingen jordforbindelsestik.
Betegnelse for risiko for personskader, dødsfald eller beskadigelse af værktøjet i
tilfælde af at du er uopmærksom på instruktioner i denne manual.
Indikerer farer for elektrisk stød.
Tag straks stikket ud af stikkontakten, hvis ledningen beskadiges og i forbindelse
med vedligeholdelse.
76
Always check the vacuum bag for signs of damage before each use. Small, sharp
objects can be sucked up and if the bag is damaged or worn the objects might be
thrown in your direction or the direction of others. This could lead to serious injury so
please check. If your bag is damaged or badly worn please replace it with a new one.
5. SERVICE & MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the
motor.
This machine has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
Lubrication
The machine requiers no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please contact the service address on the warranty
card. In the back of this manual you find an exploded view showing the parts that can be
ordered.
Environment
To prevent damage during transport, the appliance is
delivered in a solid packaging which consists largely of reusable material. Therefore please
make use of options for recycling the packaging.
Faulty and/or discarded electrical or electronic apparatus have to be collected at the
appropriate recycling locations.
Warranty
The guarantee conditions can be found on the separately enclosed guarantee card.
Ferm
Ferm
GB
D
NL
F
E
P
I
S
SF
N
DK
9
Werbung
Inhaltsverzeichnis
