Inhaltsverzeichnis
Werbung
DK
44
Class II machine – Double insulation –
You don't need any earthed plug.
Replacing cables or plugs
Immediately throw away old cables or plugs
when they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in
the wall outlet. If you have to rewire at any time
please connect as follows. Attach the blue cable
(Neutral) to the terminal marked N or coloured
black or blue. Attach the brown cable (Live) to
the terminal marked L or coloured red or brown.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm
2
. When using a cable
reel always unwind the reel completely.
3. ASSEMBLY
Assembly vacuum tube
Fig. 1
1. Pull the tube out of the housing until the
marking.
2. Allign the holes
3. Fix the tube onto the housing using enclosed
the screws.
4. Cover the screws using the enclosed
screwcovers.
5. The screws can be removed for easier
storage.
Attach the collection bag
Fig. 3
Always use the collection bag when
using vacuum mode.
Attach the hook to the upperpart of the housing.
Slide the open end of the collection bag over the
tube and connect it to the housing. Attach the hook
to the lower part of the housing.
Ferm
Ferm
Always check the vacuum bag for signs
of damage before each use. Small,
sharp objects can be sucked up and if
the bag is damaged or worn the objects
might be thrown in your direction or the
direction of others. This could lead to
serious injury so please check. If your
bag is damaged or badly worn please
replace it with a new one.
4. OPERATION
Operation
Fig.2
Plug in your appliance at the mains (or extension
lead) and when you are ready and well balanced,
press the ON/OFF button (5) and it will start.
Press again to turn it off.
Note: We recommend the use of a heavy-duty
outdoor extension cable.
Alter the harness length so that you can stand up
straight and allow the blower to rest on its wheels
when in use. This will lighten the load across
your shoulders and back. Use in a forward and
backward direction, not side to side.
Changing operation mode (blow/vac)
Fig.2
When you want to change from one mode to
another, simply pull the option level to suit your
requirement. Turn it clockwise to blower mode
and anti-clockwise to vacuum mode (remember
to fit the bag if you want vacuum mode).
Speed dial
Fig.1
Your blower/vac has a variable speed dial (6)
which can be used as conditions dictate.
5. SERVICE & MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
GB
05
Werbung
Inhaltsverzeichnis
