Warranty; Maintenance - Ferm EBM1004P Bersetzung Der Originalbetriebsanleitung

3. OPERATING
Before adding or removing the nozzle
from the machine, first remove the power
plug from the wall socket.
Mounting accessories
Dust blower function
Fig. A + B
• Attach the nozzle (5) to the outlet (1).
• Turn the nozzle (5) clockwise to lock it in place.
Dust suction function
Fig. A + C
• Attach the nozzle (5) to the suction port (4).
• Attach the dustbag (6) to the outlet (1).
After use, always empty the contents of the dust
bag in a dust bin. Open the zipper to release the
dust from the dust bag.
Operation
The On/Off switch
Fig A.
• Switch the machine on by pressing the On/Off
swtich (2).
• Releasing the On/Off switch (2) will turn the
machine off again.
Switch-lock
Fig. A.
• Lock the On/Off switch by pressing the On/Off
switch (2) and then pressing the lock-on button
(3).
• Release the switch lock again by pressing the
On/Off switch (2) shortly.
Adjusting the air speed
Fig. A.
The air speed can be adjusted by the dial wheel.
• To increase the air speed turn the variable
speed wheel (8) up (to higher number)
• To decrease the air speed turn the variable
speed wheel (8) down (to lower number)

4. MAINTENANCE

Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
6
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia,
etc. Chemicals such as these will damage the
synthetic components.
Replace power cords
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.

WARRANTY

The warranty conditions can be found on the
separately enclosed warranty card.
The product and the user manual are subject
to change. Specifications can be changed
without further notice.