Pip (Picture-In-Picture) And Pap (Picture-And-Picture) Modes; Freezing Picture; Zoom Modes; Auto - Finlux 37FLHD760 Bedienungsanleitung

To cancel mute, there are two alternatives; the
first one is pressing the
second one is increasing the volume level.
PIP (Picture-in-Picture) and PAP
(Picture-and-Picture) Modes
Press the button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. Aspect Ratio of
the PIP window is fixed and 4:3.
When PIP Mode is entered, the default active
window is the PIP window and the active
window is indicated by a white frame around
it. The active window can be changed by
pressing  /  button. The status info OSD
belongs to active window. The place of the
status OSDs are same for both windows.
Press the button again to to PAP mode.
At PAP Mode, two pictures with equal sizes
are displayed on the screen. Aspect Ratios of
the windows are fixed.
When you switch to PAP Mode, Main window
in PIP Mode is displayed on the right side of
the screen. The active window can be
changed by pressing
Press the button again to exit the PAP
mode.
NOTE: In all HDMI modes, PIP and PAP are not
visible. In YPbPr 1080i, PIP is not visible.
NOTE: See Appendix B for all PIP/PAT modes.

Freezing Picture

You can freeze the picture on the screen.
Press the OK button to freeze picture. Press
again to quit freeze mode.

Zoom Modes

You can change the aspect ratio of the TV for viewing
the picture in different zoom modes.
Press button to directly change the zoom mode.
button and the
 /  button.
English - 37 -
Available zoom modes are listed below.
Note: In YPBPR and HDMI modes,while in 720
and 1080 resolutions, Full 1 and Full 2
modes will also be visible.

Auto

W hen a WSS (Wide Screen Signalling)
signal, which shows the aspect ratio of the
picture, is included in the broadcast signal or
the signal from an external device, the TV
automatically changes the ZOOM mode
according to the WSS signal.
• When the AUTO mode does not function
correctly due to poor WSS signal quality or
when you want to change the ZOOM mode,
change to another ZOOM mode manually.

Full

This uniformly stretches the left and right sides
of a normal picture (4:3 aspect ratio) to fill the
wide TV screen.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect
ratio), use the Full mode to restore the picture
to its original size.
4:3
Use to view a normal picture (4:3 aspect ratio)
as this is its original shape.

Panoramic

This stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the
screen, without making the picture appear
unnatural.