Finlux 37FLHD760 Bedienungsanleitung Seite 34

Install Menu
Program
Band
Channel
Colour System
Sound System
Fine Tune
Search
VCR
Store Program
Program
Press or button to select Program. Use
/ button to select the programme number. .
You can also enter a number using the
numeric buttons on the remote control. There
are 100 programme storage between 0 and
99.
Band
Band can be selected either as C or S. Press
/ button to select Band.
Channel
Channel can be changed by
numeric buttons.
Colour System
Press or button to select Colour System.
Use / button to change the colour system
to PAL, SECAM or AUTO.
If sound system is set to I, SECAM will not be
available for the colour system settings.
Note:In AV modes, you can choose NTSC
3.58, NTSC 4.43 or PAL60 as well.
Sound System
Press or button to select Sound System.
Press / button to change the sound
system to BG, I, DK, L or LP.
INSTALL
1
S
36
AUTO
BG
0
423.25
Off
/ button or
English - 33 -
Fine Tune
Press or button to select Fine Tune. Press
/ button to adjust the tuning.
Search
Press or button to select Search. Use
/ button to start programme searching. You
can also enter the desired frequency using the
numeric buttons while Search item is
highlighted.
VCR
This item can be seen in all modes except for
PC, YPbPr and HDMI.
If you want to watch a VCR source from one of
these modes, then it will be better to set VCR
mode On. To do this, while the item is
highlighted, press the
If you want to watch a DVD, then you must set
this item as Off.
Store Program
Press or button to select Store Program.
Press or OK button to store the settings.
"Program Stored" will be displayed on the screen.
Program Menu
Name
Delete
By moving the cursor in four directions you
can reach 20 programmes in the same page.
You can scroll the pages up or down by
 /  buttons to set it On.
PROGRAM
Insert
APS