Herunterladen Inhalt Inhalt Diese Seite drucken

Connection And Preparation - Grundig BT 1000 DAB+ Bedienungsanleitung

Micro hifi system
Vorschau ausblenden Andere Handbücher für BT 1000 DAB+:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

CONNECTION AND PREPARATION

Connecting an MP3 player or a
USB memory stick
The device supports most MP3 players and USB
memory sticks on the market.
Caution:
The device must be switched off while the
7
USB connection is being made. If it is not
switched off, data can be lost.
1
Connect the USB interface of the MP3 player
to the »USB« socket of the device with a stand-
ard USB cable;
or
insert the USB plug of the USB memory stick
into the »USB« socket on the device.
Notes:
To remove the MP3 player or the USB mem-
7
ory stick, switch off the device and pull out
the cable or the data medium.
The device's »USB« socket is not suitable for
7
a USB hub or a computer.
Inserting a memory card
The device supports SD/SDHC and MMC mem-
ory cards.
Caution:
The device must be switched off while the
7
memory card is being inserted. If it is not
switched off, data can be lost.
1
Insert the memory card carefully into the »SD«
card slot with the contacts facing the rear until
it latches into place.
Notes:
Do not use excessive force when inserting the
7
memory card. Only apply slight pressure.
The memory cards are resistant to dirt and
7
moisture, but may only be inserted into the
device in a dry and clean condition.
Never remove memory cards during opera-
7
tion. This can damage the memory card.
This type of damage will invalidate your
warranty.
ENGLISH
24
Removing the memory card
Caution:
The device must be switched off while the
7
memory card is removed. If it is not switched
off, data can be lost.
1
Remove the memory card from the card slot by
pressing the card inwards slightly until the latch
is released. Then pull out the card.
Connecting external devices
Note:
Switch the device off before you connect
7
external devices.
1
Connect the audio input sockets of the external
device to the »AUX« socket of the device with
a stereo jack plug (ø 3,5 mm).
Connecting the headphones
1
Insert the headphone plug (3.5 mm) into the
»
U
« socket on the device.
Note:
The loudspeakers of the device are switched
7
off.
Caution:
Excessive volume levels when using head-
7
phones or earphones can damage your
hearing.
---------------------------------------

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis