Bluetooth Mode - Grundig BT 1000 DAB+ Bedienungsanleitung

BLUETOOTH MODE

Compatible with the following
devices
Your BT 1000 DAB+ can be connected to any
commercially available Bluetooth-compatible de-
vices that comply with the A2DP standard. This
includes smartphones, laptops and tablet PCs,
for example.
Selecting the Bluetooth input
source
1
Select the Bluetooth input source by pressing
»MODE« on the device or »AUX/BT« on the
remote control.
– Display: » BT « and » « flash.
Finding and connecting a
Bluetooth auxiliary device
1 Activate the Bluetooth function on the
Bluetooth auxiliary device.
2
Start the search function on the Bluetooth aux-
iliary device.
– After a short time, your BT 1000 DAB+ will
be displayed on the Bluetooth auxiliary de-
vice.
3 Select the BT 1000 DAB+ on the Bluetooth
auxiliary device and connect to it.
4
When the Bluetooth auxiliary device is con-
nected to your device, the » « lights up and
the name of the Bluetooth auxiliary device is
displayed briefly.
Note:
Your BT 1000 DAB+ can only receive and
7
play the audio signal from one Bluetooth de-
vice; however, up to 8 Bluetooth auxiliary
devices can be logged on.
Playback from the Bluetooth
auxiliary device
1
Start playback on the Bluetooth auxiliary de-
vice.
2 Adjust the volume with »
ENGLISH
32
---------------------------------------------------------------------------------------------------
– + «.
V
3 End playback on the Bluetooth auxiliary de-
vice.
Notes:
Various functions can also be controlled on
7
the BT 1000 DAB+.
Press » e II OK« to pause playback,
press » e II OK« again to resume playback;
press »E« to select the previous track and »F«
for the next track.
Note that the data transmission range can
7
be as much as 9 m, depending on the Blue-
tooth device that is used and the structure of
the building.
Deactivating the Bluetooth aux-
iliary device
1
Deactivate the registered Bluetooth auxiliary
device on the auxiliary device.
– The » « logo flashes.
Reactivating the Bluetooth auxil-
iary device
1 If you move out of data transmission range or
switch off Bluetooth mode, the Bluetooth de-
vice is logged out.
Notes:
You only have to log Bluetooth auxiliary de-
7
vices on once.
When the Bluetooth auxiliary device moves
7
back into signal range of the BT 1000
DAB+, the auxiliary device logs on auto-
matically.
The BT 1000 DAB+ connects first to the last
7
Bluetooth auxiliary device that was logged
on.
If the Bluetooth auxiliary device is not recog-
7
nised, it has to be activated again via its own
menu.
If it is not possible to connect to a Bluetooth
7
auxiliary device that was registered previ-
ously, remove your BT 1000 DAB+ from the
Bluetooth auxiliary device's device list and
repeat the search and connection proce-
dure.