Tuner Mode - Grundig BT 1000 DAB+ Bedienungsanleitung

TUNER MODE

DAB radio mode
Selecting the DAB radio input
source
1 For the best DAB reception, align the wire an-
tenna accordingly.
2
Select the DAB input source with »MODE« on
the device or »DAB/FM« on the remote con-
trol.
– Display: » DAB « followed by the name of a
DAB station.
Selecting stored stations
1 Select the required station using the number but-
tons »1« to »0« directly.
Note:
For two-digit preset numbers, press the
7
number buttons briefly one after the other.
2 Select the radio station step-by-step by pressing
G H
» « or » «.
Displaying DAB station information
1
To briefly display information on the current
DAB station, press »DISPLAY« repeatedly.
------------------------------------------------------------------------------------------------------------------------
FM radio mode
Selecting the tuner input source
1
For the best FM reception, align the wire an-
tenna accordingly.
2
Select the FM input source with »MODE« on
the device or »DAB/FM« on the remote con-
trol.
– Display: » FM RADIO « and the name of the ra-
dio station or the frequency.
– The most recently selected station is played
(Last Station Memory).
Selecting presets
1 Select the required station using the number but-
tons »1« to »0« directly.
Note:
For two-digit presets, press the number but-
7
tons briefly one after the other.
2
Select the radio station step-by-step with »
H
or » «.
Stereo/mono reception
When the device receives stereo channels,
» « appears in the display. If the signal from
!
the stereo channel is weak, you can improve the
sound quality by switching to mono reception.
1
Press »STEREO
7
tion.
– Display: » MONO « appears briefly and »
disappears.
2 To switch back to stereo reception, press
»STEREO «.
7
– Display: » STEREO « appears briefly and
» « appears.
!
Displaying RDS station information
If the device receives an RDS station, the sta-
tion name appears in the display together with
» «. If no information is available, the re-
ception frequency appears in the display.
Additional information can be displayed.
1
To display information on the current RDS sta-
tion, press »DISPLAY« repeatedly.
« to switch to mono recep-
ENGLISH
G
«
«
!
29