General Functions; Switching On And Off; Automatic Switch-Off; Adjusting The Volume - Grundig BT 1000 DAB+ Bedienungsanleitung

GENERAL FUNCTIONS

Switching on and off

1
Press »ON/OFF« on the device or »
remote control to switch on the device.
– The last input source used is automatically
selected.
2
Press »ON/OFF« on the device or »
remote control to switch off the device
– Display: the current time and the day of the
week.

Automatic switch-off

The device switches off automatically after 15
minutes in standby mode if:
– the device is in the stop position;
– there is no audio signal detected at the
»AUX« socket;
– the Bluetooth auxiliary devices is not sending
an audio signal.
To use the device, switch it back on.
Selecting the input source
1 Select the input source by pressing »MODE«
on the device or »CD/SD/USB«, »AUX/BT«
or »DAB/FM« on the remote control.

Adjusting the volume

1
Adjust the volume with »
– Display: briefly » VOL « from » 0 « to » MAX «.
Selecting sound settings
You can choose between several sound settings.
1 Select the sound setting using
the remote control.
– Display: » USER «, » CLASSIC «, » POP «, » JAZZ «,
» ROCK « or » UBS «.
ENGLISH
28
8 « on the
8 « on the
– +
« .
V
»DSC « on
---------------------------------------------------------------------------------------
Changing the "USER" sound set-
ting
You can change the » USER « sound setting.
1 Select the » USER « sound setting by pressing
»DSC « on the remote control.
2 Press and hold »DSC
– Display: » BASS 0 «.
3 Set the bass with »E« or »F« and confirm with
»DSC «.
– Display: » TRE 0 «.
4
Set the treble with »E« or »F« and confirm with
II OK«.
» e
Selecting Ultra Bass System
1
Select Ultra Bass System by pressing
on the remote control repeatedly until » UBS «
appears in the display.
Muting
You can switch the device speakers to and from
mute mode with this function.
1
Activate mute with »
– Display: » MUTE «.
2
Deactivate mute with »
trol
– Display: » MUTE « disappear.
«.
»DSC
« on the remote control
d
« on the remote con-
d
«