Input Setup (-P Only); Figure 15 Main Menu - Input Setup - Fluke 914X-Serie Bedienungsanleitung

914X Field Metrology Wells

Input Setup (-P only)

4.4 Input Setup (-P only)
F1
TEMP SETUP
F1 SELECT INPUT
F2 SETUP INPUT
F1
F2
F3
F4
F3 REFerence INPUT
F1
F2

Figure 15 Main Menu - Input Setup

34
9142/9143/9144 MAIN MENU
F2
PROG MENU
SENSOR TYPE: <RTD, TC, mA> <select>
RTD SETUP
WIRES: <4, 2, 3> <select>
RTD TYPE: <RESISTANCE, PT100(385), PT100(3926), PT100(JIS), NI-120> <select>
TC SETUP
TC TYPE: <K, L, M, N, R, S, T, U, mV, C, E, J> <select>
mA SETUP
LOOP POWER: <DISABLE, ENABLE 24V> <select>
TEST uut CALCulation
SENSOR TYPE: <RTD, TC> <select>
INPUT: <edit> <ohms if RTD, mV if TC is selected>
TEMPerature: <calculated value displayed> <view only>
PROGram PROBE
SERIAL number: <edit> <alphanumeric>
CALibration DATE: <edit>
PROBE TYPE: <ITS-90, CVD, IEC-751, RESISTANCE> <select>
List: ITS-90
RTPW
A
B
C
A4
B4
PROGRAM probe <YES, NO> <password required to program probe>
TEST reference CALCulation
RESISTANCE: <edit>
TEMPERATURE: <calculated value displayed> <view only>
F3
SYSTEM MENU
CVD IEC751 RESISTANCE
R0
ALPHA
BETA
DELTA
F4
INPUT SETUP (-P only)