Inhaltsverzeichnis
Werbung
Important Information
Electrical and physical specifications
Mains voltage
Operating Temperature
Storage Temperature
Operating Humidity
M-Vision 1080p 260
Weight
Power consumption
Thermal Dissipation
M-Vision Cine LED
Weight
Power consumption
Thermal Dissipation
M-Vision Cine 230, 260, 320, 320 3D, 400, 400 3D
Weight
Power consumption
Thermal Dissipation
M-Vision LED+IR
Weight
Power consumption
Thermal Dissipation
General precautions
Do not open the cabinet. There are no user serviceable parts inside.
Use only the power cable provided.
Ensure that the power outlet includes a Ground connection, as this equipment MUST be
earthed.
Take care to prevent small objects such as paper or wire from falling into the projector.
If this does happen, switch off immediately, and have the objects removed by
authorised service personnel.
Do not expose the projector to rain or moisture, and do not place any liquids on top of
the projector.
Unplug before cleaning, and use a damp, not wet, cloth.
Do not touch the power plug with wet hands.
Do not touch the power plug during a thunder storm.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged power
cable.
Do not use the lamp for more than 2000 hours (LED 60000 hours), as this may cause
serious lamp failure, damage the lamp module and cause extra cost on replacement.
Page 4
100-240 VAC ±10%, 50-60Hz (single phase)
10 to 35°C
-20 to 60°C
20% to 85% non-condensing
approximately 13 kg (29 lbs)
331-347W, <2.5W in Standby
1183 BTU/hr
approximately 15 kg (33 lbs)
230-280W, <1W in Standby
955 BTU/hr
approximately 13 kg (29 lbs)
230: 292-302W, 260: 332-339W,
320 and 320 3D: 425W, 400 and 400 3D: 500-505W
<1W in Standby
230: 1030 BTU/hr, 260: 1156 BTU/hr,
320 and 320 3D: 1451 BTU/hr, 400 and 400 3D: 1722 BTU/hr
approximately 19.5 kg (43 lbs)
250-330W, <1W in Standby
1125 BTU/hr
Digital Projection
M-Vision Series
Rev I August 2014
Werbung
Inhaltsverzeichnis
