Verwandte Anleitungen für DFI P5BV3+
Inhaltszusammenfassung für DFI P5BV3+
- Seite 4 ® ®...
- Seite 5 ®...
- Seite 19 ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD USER PASSWORD CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION PNP/PCI CONFIGURATION SAVE & EXIT SETUP LOAD FAIL-SAFE SETTINGS EXIT WITHOUT SAVING LOAD OPTIMAL SETTINGS ↑↓→←...
- Seite 20 ROM PCI/ISA BIOS STANDARD CMOS SETUP AWARD SOFTWARE, INC. Date (mm:dd:yy) : Mon, May 25 1998 Time (hh:mm:ss) : 13: 27: 50 HARD DISKS TYPE SIZE HEAD CYLS PRECOMP LANDZ SECTOR MODE Primary Master Auto Auto Primary Slave Auto Auto Secondary Master Auto Auto...
- Seite 21 ROM PCI/ISA BIOS STANDARD CMOS SETUP AWARD SOFTWARE, INC. Date (mm:dd:yy) : Mon May 25 1998 Time (hh:mm:ss) : 13: 27: 50 HARD DISKS TYPE SIZE HEAD MODE CYLS PRECOMP LANDZ SECTOR Primary Master Auto Auto Primary Slave Auto Auto Secondary Master Auto Auto...
- Seite 22 ROM PCI/ISA BIOS BIOS FEATURES SETUP AWARD SOFTWARE, INC. : Disabled : Enabled Virus Warning Video BIOS Shadow CPU Internal Cache : Enabled C8000-CBFFF Shadow : Disabled External Cache : Enabled CC000-CFFFF Shadow : Disabled Quick Power On Self Test : Enabled D0000-D3FFF Shadow : Disabled...
- Seite 23 ROM PCI/ISA BIOS POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. Power Management : User Define ** PM Events ** PM Control by APM : Yes IRQ3 (COM 2) : Primary IRQ4 (COM 1) : Primary Video Off Method : DPMS Support IRQ5 (LPT 2) : Primary...
- Seite 24 ROM PCI/ISA BIOS POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. Power Management : User Define ** PM Events ** PM Control by APM : Yes IRQ3 (COM 2) : Primary IRQ4 (COM 1) : Primary Video Off Method : DPMS Support IRQ5 (LPT 2) : Primary...
- Seite 25 ROM PCI/ISA BIOS CHIPSET FEATURES SETUP AWARD SOFTWARE, INC. SIMM DRAM Timing : 70 ns **** System Health Monitor **** DIMM 1 DRAM Timing : 70 ns Current CPU Temperature : 27 C/80 DIMM 2 DRAM Timing : 70 ns Current CPU Fan Speed : 4285 RPM SDRAM CAS Latency...
- Seite 27 Genesys Logic System Health Monitor Rev.A (for VIA) The time Update w/o Save interval for Polling Interval: 4 Seconds monitoring the system Update and Save Temperature User Setting CPU Over-Heat Temperature: Celsius temperature limit CPU Hysterisis Temperature: 75 Fahrenheit Default Setting Current temperature CPU Temperature:...
- Seite 28 ® ®...