Specifications - Panasonic ER1512 Bedienungsanleitung

Thank you for choosing a Panasonic Hair Clipper. Please
read all instructions before use.
Important
Before use

This clipper is designed for professional use to trim hair and
beards. Charge it for 8 hours before use for the first time in order
to activate the built‑in rechargeable batteries. It can be operated
on either an AC adaptor or rechargeable batteries. Read all
instructions carefully before use.
Charging the clipper

•
Avoid charging the batteries at temperatures below 0 °C or
above 5 °C.
•
Avoid charging the batteries in direct sunlight or near a radiating
heat source.
•
The charge status ( ) lamp may blink at an early stage when
it is used for the first time or if it has not been used for 6 or more
months even if it is fully charged. This is not a malfunction.
•
Even though the clipper may not be used for an extended period,
charge every 6 months to preserve battery life.
Using the clipper

•
The clipper may become warm during operation and/or charging.
This is normal.
•
Check that the blades and the attachments are not damaged
before use. Replace them if they are damaged.
•
You should not allow permanent wave lotion, hair restorer or hair
spray to come into contact with the main body or the blades.
Doing so may result in cracking, discoloring or corrosion.
•
You should not drop the clipper on the floor.
•
Before each use, apply oil at the places marked with arrows.
(See page 7.)
•
You should not knock the blades and the attachments against
hard objects.
•
You should not trim the hair of a pet.
Cleaning the clipper

•
Clean the housing using only a cloth slightly dampened with
water or a mild soap solution.
•
Never use a caustic solution.
•
Never submerge the clipper in water.
•
Clean the power plug regularly to remove any dust or dirt.
Storing the clipper

•
Never tamper with moving parts.
•
Avoid grabbing the clipper by the power cord, as it may become
detached, causing damage or injury.
•
If the clipper is not working properly, have it inspected at an
authorized service center.

Specifications

Power source: See the name plate on the product.
(Automatic voltage conversion)
Motor voltage: 2.4 V
Charging time: Approx. 1 hour