Temperature Display; Setting The Alarm Time - Hama RCR 110 Bedienungsanleitung

• Set the following information in the order listed:
• Year
• Month
• Day
• Hours
• Minutes
• To select the individual values, press the ▲ button (3) or the
button (2) and con rm each selection by pressing the MODE
button (4).
• Press the MODE button (4) immediately to adopt the set value
displayed and skip ahead.
• If you do not make an entry for 30 seconds, you automatically
exit the setup mode.
Weekday
• To change the language in which the weekday is displayed,
press the button (2) for 3 seconds. The current language
will be displayed.
• Hold down the button (2) to change to the other languages.
Note – Day of the week
You can choose German (GE), English (EN), Italian (IT), Spanish
(SP) or French (FR) for the weekday display.
Setting the time zone
Note – Time zone
• The DCF signal can be received over long distances, but
always transmits the current Central European Time in
Germany. Make sure you account for the time difference in
countries with another time zone.
• If you are in Moscow, the time is 3 hours later than in
Germany. This means that you should set +3 for the time
zone. The clock then automatically sets the time to 3 hours
after the DCF signal received or relative to the manually
set time.
• Press and hold the ▲ button (3) for approx. 3 seconds until the
time zone symbol F is displayed.
• Press and hold the MODE button (4) for approx. 3 seconds to
set the required time zone difference.
• To select the individual values, press the ▲ button (3) or the
button (2) and con rm each selection by pressing the MODE
button (4).
• Press and hold the ▲ button (3) for 3 seconds to switch the
display between local and time zone-shifted time.
Selecting 12 or 24-hour format
• Press the ▲ button (3) to switch between the 12 and 24-hour
formats.
4
Selecting weekday/calendar week display
• Press the button (2) to switch between displaying the
weekday and the calendar week (WEEK).

5.3. Temperature display

• Press the °C/°F/WAVE button (5) to choose between °C and °F
for the temperature display.
5.4. Alarm
Note – Alarm
The alarm time always depends on the time displayed, that is,
the local or time zone-shifted time (

Setting the alarm time

• Repeatedly press the MODE button (4) to access alarm mode 1
(AL1) or 2 (AL2).
• Press and hold the MODE button (4) to set the alarm time for
the alarm displayed. The hours display begins to ash.
• Press the ▲ button (3) or the
the alarm time and con rm your selection by pressing the MODE
button (4). The minutes display begins to ash.
• Repeat the process to set the minutes for the alarm time.
• Press the MODE button (4) repeatedly to also set the other
alarm mode or return to the temperature display.
Activating/deactivating the alarm
• Press the button (9) repeatedly to activate/deactivate alarm
1 or alarm 2.
• If an alarm is activated, the corresponding symbol
be displayed.
Stopping the alarm/snooze function
• If the alarm is triggered, the alarm symbol
ash and an alarm will sound.
• Press the button (9) to stop the alarm. Otherwise, it will stop
automatically after 4 minutes.
Note – Snooze function
While the alarm signal is sounding, press the LIGHT-SNOOZE
button (1) to activate the snooze function. The alarm symbol
(7) / and Z will begin to ash. The alarm signal will be
z
stopped for 4 minutes, after which it will sound again.
).
F
button (2) to select the hour for
/ will
/ will begin to