About The Filter - Levoit Core 300 Bedienungsanleitung

EN
USING YOUR PURIFIER (CONT.)
Sleep Mode
Sleep Mode operates quietly by using the
lowest possible fan speed.
Tap to turn Sleep Mode on/off.
Note:
•
All indicators will be at half brightness
while Sleep Mode is on.
•
Tapping
Timer
You can set a timer for 2, 4, 6, or 8 hours.
1. Tap repeatedly to select a time. The
timer will start automatically.
Note:
•
The indicators are not buttons and
cannot be used to select a time.
•
The timer indicators will light up blue
when active.
2. Once the timer has finished, the air
purifier will power off.
3. To cancel a timer, tap
indicators are off.
Note:
•
You can change the fan speed at any
time while the timer is on.
•
The timer will restart if the time
is changed.
Display Lock
Locking the display prevents settings from
being accidentally changed. Buttons will not
respond to being tapped.
1. Tap and hold
unlock the display.
Note: You can turn the display on and off
even if the display is locked.
8
will exit Sleep Mode.
until all timer
for 3 seconds to lock/
A B O U T T H E F I LT E R
The air purifier uses a 3-stage filtration
system to purify air.
A. Pre-Filter
• Captures large particles such as dust,
lint, fibers, hair, and pet fur.
• Maximizes the filter's life.
B. True HEPA Original Filter
• Removes at least 99.97% of airborne
particles 0.3 micrometers (µm)
in diameter.
• Filters small particles such as smoke,
dust, mold spores, bacteria, viruses,
and allergens such as pollen, dander,
and mites.
C. Activated Carbon Filter
• Physically absorbs unwanted odors
and fumes.
• Filters compounds such as
formaldehyde, benzene, ammonia,
hydrogen sulfide, and volatile organic
compounds (VOCs).
A
B
C