Herunterladen Inhalt Inhalt Diese Seite drucken

Using Your Purifier - Levoit Core 300 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Core 300:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GETTING STARTED (CONT.)
3.
Replace the filter cover and twist
clockwise to lock.
[Figure 1.3]
4.
Place the purifier on a flat, stable surface
with the display facing up. Allow at least
38 cm / 15 in of clearance on all sides of
the purifier. Keep away from anything that
would block air flow, such as curtains.
[Figure 1.4]
Figure 1.3
38 cm /
15 in
Figure 1.4
cover should
snap shut
38 cm /
15 in
U S I N G YO U R
P U R I F I E R
1.
Plug in and tap
The fan will start on level I.
2.
Optionally, tap
between I, II, and III.
Note:
The indicators are not buttons and
cannot be used to change the
fan speed.
The fan speed indicators will light up
when active.
Fan speed III is the loudest, but cleans
air the quickest.
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at maximum speed (level
III) for 15–20 minutes before using a
lower speed.
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
3.
Tap
to turn off the air purifier.
Figure 2.1
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
Note: The air purifier will not remember
timers or Sleep Mode.
to turn on the purifier.
[Figure 2.1]
to change fan speed
EN
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis