Optional Accessories - Makita AN634H Betriebsanleitung

Fig.28: 1.
Removing jammed nails
CAUTION:
Always lock the trigger by turning
the trigger lock lever to the lock position
disconnect the hose before removing jammed
nails. Also remove the nails from the magazine
before cleaning a jam.
1.
Depress the latch lever and open the door. Open
2.
and hit it with a hammer lightly.
Fig.29: 1. Metal rod 2.
3.
driver or other similar tool.
Fig.30
4.
and the door.
MAINTENANCE
CAUTION:
Before attempting to perform
inspection or maintenance, always lock the trig-
ger by turning the trigger lock lever to the lock
position , and disconnect the air hose from the
tool.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Cleaning of tool
using an air duster.
Fig.31: 1. Magnet
Storage
place.
Fig.32: 1.
Maintenance of compressor, air set
and air hose
Fig.33: 1. Drain cock
Fig.34: 1.
lubrication will cause O-rings to wear quickly.
Fig.35: 1. Oiler 2. Pneumatic oil
it may become dangerously caught on during operation.
and areas which may lead to damage or abrasion to
, and
the hose.
OPTIONAL
3. Hammer
ACCESSORIES
-
CAUTION:
are recommended for use with your Makita tool
NOTE: Some items in the list may be included in the
13 ENGLISH
These accessories or attachments
-