Camargue ÄLVSBORG Installationsanleitung Seite 17

Safety instructions
1. Children should not bath alone or unattended in a bubble bath.
2. People with heart problems, high or low blood pressure and pregnant women should consult a physician before using the whirlpool.
3. The water to fill the tub should not be too hot. Check the water temperature before stepping into the tub so you do not burn your feet and legs.
4. When the massage function is on the people with long hair should not lower their head under the water level at the suction filter.
Drawing (1, part 14)
Display & Bluetooth functions
Air blower
Water pump
Underwater lamp
On/Off button
Manual of Display
1. There will be a "beep" sound when you press any button.
2. On/Off button: Press the
underwater lamp button will be illuminated with red light. Press the
3. Underwater lamp: In ready mode, press the
chromotherapy, which means it will change the color in a cycle of 6 different colors. When you press the
4. Air blower: In ready mode, press the
5. Water pump:
5.1 There is water sensor level, to avoid the water pump to start if there is no, or too little water in the bathtub. This could damage the water pump.
5.2 In ready mode, when there is enough water and the water sensor level detect it is ok, you press the
start. When you press the
5.3 When the water sensor level detect the water level is not high enough, the water pump can not be started.
5.4 If the water pump is running, and the water level sensor detects the water level is not high enough, the water pump will stop. But if you fill in
more water to reach the correct water level, the pump will be able to start again.
6. Bluetooth loudspeaker:
6.1 Press the and button the power is on, the display is in ready mode, the underwater lamp and bluetooth speaker is activated.
Press the button again to switch on/off the underwater lamp and bluetooth speaker.The Bluetooth function switches on and off with
the underwater lamp, if the lamp is not switched on, you can not use the Bluetooth speaker function.
6.2 When the bluetooth speaker is switched on, you can use a mobile phone or tablet with bluetooth to search for it, then connect to your mobile
to play music. Once your phone is connected to the Bluetooth speaker, you use your mobile phone to adjust volume, skip to next song etc.
button then the power is on then the display in ready mode; the underwater lamp is on, the on/off button and
button and the underwater lamp is switched on, the lamp will automatically start the
button, and the air-blower will start; Press the
button again, it will stop.
button again, the power is off, all functions will discontinue.
button again and the blower will stop.
again, the lamp is switched off.
button, and the water pump will