Whirlpool SPIW309A3WF.1 Gebrauchsanweisung Seite 5

3. On your remote control:
• press the WiFi button, wait a few seconds and then, press Hum%+ and Hum%- buttons simultaneously for
3 seconds: this activates the provisioning process. The appliance is being set to a "search" mode for a local
network.
• The Connectivity icon on the air conditioner starts blinking fast.
4. Turn ON your smart device (Phone or Tablet), access your list of available wireless networks in the setting
menu.
5. The air conditioner has created a wireless network (SSID), then select it from the list of available wireless
AIRCON_88_A1_23_B3_66_ C3). If you don't see it, you may need to refresh the list of networks or verify the
6. Once you have selected the SSID, password will be required . Use the SAID (see "Before starting the set up
Note: This password is case sensitive. Then connect to the network.
7.
8. Open a web browser. If nothing appears, type "192.168.10.1" in the address bar (URL) and press Enter. The
9. In the drop down list of available networks, select the name of your home wireless network.
10. If home wireless network is hidden, select "Other" (-> ) and manually enter its name (SSID) and security
protocol. Enter password for your home wireless network, if required, and submit (->).
Remember this kind of password is case sensitive.
11. Click "Submit" and wait for few seconds.
12.
repeat the procedure.
13. The setup process is complete.
pressing Hum%+ and Hum%- buttons simultaneously on the remote control for 3 seconds.
5