Operation - Hama EWS-152 Bedienungsanleitung

Warning
• Buy special or suitable installation material from a specialised dealer for
wall-mounting.
• Ensure that no faulty or damaged parts are installed.
• Never apply force during installation. This could damage the product.
• Before installation, ensure that the chosen wall is suitable for the weight to be
installation, and make sure that there are no electrical wires, water, gas or other
lines at the installation site on the wall.
5.1 Base station
• Use the base to position the base station on a level surface.
5.2 Measuring station
• You can also position the measuring station on a level outdoor surface.
• We recommend installing the measuring station securely on an outdoor wall using
the opening (12). Install an anchor, screw, nail, etc. in the wall of your choice.
• Hang up the base/measuring station using the opening intended for this purpose.

6. Operation

Note – Input
Hold down the
6.1 Connection to the measuring station
• After you insert the batteries, the base station automatically searches for a
connection to the measuring station and performs initial setup.
Note
• Initial setup takes approx. 3 minutes.
• Do not press any buttons during setup. Otherwise, values may not be transmitted
correctly and there is a risk of value errors and inaccuracies.
• The setup process is completed when the indoor (3) and outdoor (1)
measurement data is displayed.
• If the base station still does not receive a signal from the measuring station , press
and hold the
the signal.
button (7) or the
button (7) for approx. 3 seconds to start the manual search for
button (9) to select values faster.
5