Herunterladen Inhalt Inhalt Diese Seite drucken

Silvercrest SMK 15 A1 Bedienungsanleitung Seite 31

Mini-kühlschränk
Vorschau ausblenden Andere Handbücher für SMK 15 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35
RP62053 MiniCooler LB5 Seite 29 Mittwoch, 12. Januar 2011 11:08 11
4.3 Connecting the appliance to the
mains
1. Plug the mains lead 3 into the socket 9.
2. Connect the mains lead 3 with the mains
supply.
4.4 Connecting the appliance to the car
electrical system
Note: When operated on a vehicle 12 V
system
the
cooling
performance is not quite so high as when
operated on 230 V mains (see "7. Technical
Data" on page 31).
1. Plug the car lead 11 into the socket 8.
2. Connect the car lead 11 to the car elec-
trical system, e.g. the cigarette lighter.
Note: You may need to pull the red cap
off the car plug.
4.5 Selecting a function
Use the function selector 6 to select the
required function:
OFF: appliance is switched off.
WARM: appliance warms and the red
indicator 10 lights up.
COOL: appliance cools and the green
indicator 5 lights up.
4.6 Select operating temperature
Set the operating temperature on tempera-
ture selector 4. Set temperature selector 4 to
for minimum output. Refrigeration per-
formance can be increased, if required, by
turning temperature selector 4 towards
(maximum
output).
increase energy consumption. To save
energy, output can be reduced again by
turning temperature selector 4 back towards
(minimum output).
SMK 15 A1
and
warming
However,
this
will
4.7 Emptying the drip tray
Condensation water may collect in the drip
tray 12. Depending on the duration and
intensity of operation, the drip tray 12
should be checked regularly and emptied if
necessary:
1. Pull the drip tray 12 forwards and out.
2. Empty out any condensation water
present.
3. Push the drip tray 12 back in.
4.8 Setting the temperature for
warming
If the WARM function is selected the
appliance warms and the red indicator 10
lights up. It is neither necessary nor possible
to set the temperature separately.
4.9 Tips for saving energy
In order not to waste energy when using the
mini refrigerator, please note the following
points for cooling:
• Set up the mini refrigerator in as cool an
environment as possible. Avoid direct
sunlight.
• Set up the mini refrigerator to allow
sufficient cool air to circulate around it at
all times.
• Allow warm food to cool down first
before putting it into the appliance to
cool.
• Do not open the door more often than is
absolutely necessary.
• Do not leave the door open for longer
than is absolutely necessary.
• Switch off the mini refrigerator if it is not
required.
In order not to waste energy when using the
mini refrigerator, please note the following
points for keeping warm:
29

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis