Tips For Saving Energy; Cleaning And Maintenance; Cleaning The Appliance - Silvercrest SMK 15 A1 Bedienungsanleitung

RP71570 MiniCool LB3 Seite 7 Freitag, 25. November 2011 3:23 15
3. Push the drip tray 12 back in.
4.8 Setting the temperature for
warming
If the WARM function is selected the
appliance warms and the red indicator 10
lights up. It is neither necessary nor possible
to set the temperature separately.

4.9 Tips for saving energy

In order not to waste energy when using the
mini refrigerator, please note the following
points for cooling:
• Set up the mini refrigerator in as cool an
environment as possible. Avoid direct
sunlight.
• Set up the mini refrigerator to allow
sufficient cool air to circulate around it at
all times.
• Allow warm food to cool down first
before putting it into the appliance to
cool.

5.1 Cleaning the appliance

To ensure your appliance gives you lasting
service, you should clean it regularly.
Warning! To avoid the danger of an
electric shock or damage:
–Always disconnect the power
supply before cleaning.
–Never immerse the appliance in
water.
–Never allow water or cleaning
agent to run into the appliance.
Caution! Never use caustic or abrasive
cleaning agents, as they could damage the
appliance.
1. Pull out the drip tray 12 and empty it.
SMK 15 A1
• Do not open the door more often than is
absolutely necessary.
• Do not leave the door open for longer
than is absolutely necessary.
• Switch off the mini refrigerator if it is not
required.
In order not to waste energy when using the
mini refrigerator, please note the following
points for keeping warm:
• Set up the mini refrigerator in as warm
an environment as possible.
• Set up the mini refrigerator to allow
sufficient air to circulate around it at all
times.
• Try to prevent warm food from cooling
down before putting it into the appliance
to keep warm.
• Do not open the door more often than is
absolutely necessary.
• Do not leave the door open for longer
than is absolutely necessary.
• Switch off the mini refrigerator if it is not
required.

5. Cleaning and maintenance

2. Clean the drip tray 12 in the sink.
3. Remove the shelf 14 and clean it in the
sink.
4. Clean the appliance with a damp cloth.
You could also use a mild washing-up
liquid if necessary.
5. Wipe it off with clean water.
6. Replace the drip tray 12 and shelf 14.
7. Do not use the appliance again until it is
fully dry.
7