Devon & Devon Lady Montageanleitung Seite 11

ASSEMBLY INSTRUCTIONS
1)
After removing the metal
components from the packing
you will note that the ends of
the two side supports differ in
size: the part with the larger
size must lean against the wall,
while the other serves for
mounting on the leg.
WALL
3)
Fasten the side supports to the legs through the socket-head
screws and washers supplied. Please note that the adjustment
screws for the basin on the side supports must be faced upwards.
2)
Position the smallest end of
the side support to correspond
with the holes on the leg.
LEG
12