Getting Started; Initial Settings; Clock Settings - JVC KD-X560BT Quickstart-Anleitung

Getting Started

Initial settings

1
Turn the ignition key of your car to ACC.
The unit is turned on.
2
Turn the volume knob to select the item to set
(see the table below), then press the knob to
make a selection.
Language
Select the language used for the control screen and
setting items. Default is "English".
Area
EUROPE (Default): For Europe, AM/FM intervals: 9
kHz/50 kHz.
M.EAST: For Middle East, AM/FM intervals: 9 kHz/50
kHz.
Date/Clock
Adjust the date, then adjust the time.
Hour / Minute / Month / Day / Year
Demo
Set the demonstration mode. Default is "ON".
3
Turn the volume knob to select [Finish], then
press the knob.

Clock settings

Ñ Synchronizing the clock time with FM
RDS
Activate [RDS Clock Sync]. See "Tuner function
settings" (P.6).
Ñ Adjusting the clock manually
✎
NOTE
• Deactivate [RDS Clock Sync] before adjusting the
clock. See "Tuner function settings" (P.6).
1
Press and hold <
2
Press <E>/<F> to select [
3
Turn the volume knob to select [Time Format],
then press the knob to select the time format
([12h] or [24h]).
4
Turn the volume knob to select [Date/Clock],
then press the knob.
Clock screen appears.
5
Turn the volume knob to adjust the hour, then
press the knob.
6
Turn the volume knob to adjust the minute,
then press the knob.
7
Turn the volume knob to adjust the day, then
press the knob.
8
Turn the volume knob to adjust the month,
then press the knob.
9
Turn the volume knob to adjust the year, then
press the knob.
10
Press < >.
> to display the settings.
].
English |
3