Dab Function Settings; External Components; Rear View Camera - JVC KD-X560BT Quickstart-Anleitung

Tuner/DAB

DAB function settings

(KD-X561DBT)
1
Press < > to display the function menu.
2
Turn the volume knob to select the item to set
(see the table below), then press the knob to
make a selection.
3
Press < > to exit.
Scan Station Updates the DAB Service List.
Favorite
Stores a service.
While listening to a service you want
to store, turn the volume knob to
select a preset number, then press
the knob.
Reset Select [Reset] and then select [Yes]
to set the DAB settings to the initial
default settings.
TI
Switches to the traffic information
automatically when the traffic bulletin
starts.
"ON", "OFF" (Default)
Setup
Priority
If the same service is provided by
Radio Data System when reception of
the service being provided by Digital
Radio becomes poor, automatically
switches to Radio Data System.
"ON", "OFF" (Default)
Related
When you select ON, the unit switches
Service
to a related service (if exists) when a
DAB service network is not available.
"ON", "OFF" (Default)
Antenna
Sets power supply to the Digital Radio
Power
antenna. Set to "ON" when the Digital
Radio antenna in use is equipped with
a booster.
Default is "ON".
PTY Search
Searches for a program by program
type.
Zoom DLS
Display the Dynamic Label Segment
screen.
SERVICE
Displays the Service List screen.

External Components

Rear view camera

To use a rear view camera, the REVERSE lead
connection is required. For connecting a rear view
camera. (P.13)
Ñ Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
Ñ To display the picture from the rear view
camera manually
1
Press <CAMERA>.
English |
7