Getting Started - JVC KD-X382BT Schnellstartanleitung

Getting Started

1
Acknowledge the crossover type and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES]), the display shows: "2-WAY X'OVER" or "3-WAY X'OVER" "PRESS"
"VOLUME KNOB" "TO CONFIRM".
Press the volume knob to acknowledge the current crossover type.
1
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB".
Press the volume knob.
2
[YES] is selected for the initial setup.
Press the volume knob again.
3
"DEMO OFF" appears.
2
Set the clock and date
Press and hold .
1
Turn the volume knob to select [CLOCK], then press the knob.
2
To adjust the clock
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
3
Turn the volume knob to make the settings, then press the knob.
4
Set the time in the order of "Hour" "Minute".
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
5
Turn the volume knob to select [12H] or [24H], then press the knob.
6
To set the date
Turn the volume knob to select [DATE SET], then press the knob.
7
Turn the volume knob to make the settings, then press the knob.
8
Set the date in the order of "Day" "Month" "Year".
Press to exit.
9
To return to the previous setting item, press
3
1
2
3
4
To return to the previous setting item, press
[SYSTEM]
[CLOCK]
[ENGLISH]/[РУССКИЙ]/[ESPANOL]/[FRANCAIS]/[DEUTSCH]*
Select the display language for menu and music information if applicable.
By default, [ENGLISH] is selected.
* Only for KD-X382BT.
Radio
1
2
.
Set the basic settings
Press and hold .
Turn the volume knob to select an item (see the following table), then
press the knob.
Repeat step until the desired item is selected or activated.
2
Press to exit.
[KEY BEEP] (Not applicable when 3-way crossover is selected.)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[ON]: The clock time is shown on the display even when the unit is
[CLOCK DISPLAY]
turned off. ; [OFF]: Cancels.
Search for a station
Press B SRC repeatedly to select FM or AM.
Press S / T to search for a station automatically.
(or)
Press and hold S / T until "M" flashes, then press repeatedly to
search for a station manually.
.
Default: [XX]
5