Balance; Max Volume; Initialvolume; Autopowerstby (Auto Power Standby) - Yamaha R-N402 Bedienungsanleitung

Configuring various functions (SETUP menu)

Balance

Adjusting the sound output balance of the left and right
speakers to compensate for sound imbalance caused by
speaker locations or listening room condition.
Setting range
L+10 to R+10

Max Volume

Sets the maximum volume to prevent excessive loudness.
Setting range
1 to 99 (1step increments), Max
Default
Max

InitialVolume

Sets the initial volume when the receiver is turned on.
Setting range
Off, Mute, 1 to 99 (1step increments), Max
Default
Off
AutoPowerStby
(Auto Power Standby)
Enables/disables the auto-standby function. If you do not
operate the unit for the specified time, the unit will
automatically go into standby mode.
Does not set the unit to standby mode
Off
automatically.
Sets the unit to standby mode automatically.
While NET, BLUETOOTH or USB is selected as
the input source, the unit will switch to standby
mode if the selected source is not played back for
On
20 minutes.
For all input sources, the unit will switch to
standby mode if it is not operated for 8 hours.
Default
U.K. and Europe models: On
Other models: Off
y
Just before the unit enters standby mode, "AutoPowerStby"
appears and then countdown starts in the front display.
48
En