Set The Wireless Network Connection Manually - Yamaha R-N402 Bedienungsanleitung

Set the wireless network
connection manually
Before performing the following procedure, check the
security method and security key on the wireless router
(access point).
MEMORY
Cursor keys
ENTER
HOME
SETUP
SETUP
NOW PLAYING
1
Press SETUP.
2
Use the cursor keys ( / ) to select
"Network" and press ENTER.
y
To return to the previous state, press RETURN.
3
Use the cursor keys ( / ) to select
"Connection" and press ENTER.
4
Use the cursor keys ( / ) to select
"Wireless" and press ENTER.
5
Use the cursor keys ( / ) to select
"ManualSetting" and press ENTER.
MANUAL
¡SSID
6
Use the cursor keys ( / ) to select "SSID"
and press ENTER.
SSID
¡
7
Use the cursor keys to enter the SSID on the
wireless router (access point), and press
RETURN to previous state.
Use the cursor keys (/) to select a character and
the cursor keys (/) to move the edit position.
You can insert / delete a character, by pressing
PRESET i (insert) or PRESET j (delete).
PRESET
ENTER ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
8
Use the cursor keys ( / ) to select
"Security" and press ENTER.
SECURITY
¡WPA2-PSK(AES)
9
Use the cursor keys ( / ) to select desired
security method and press RETURN.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
Note
If you select "None", the connection may be insecure since the
communication is not encrypted.
10
Use the cursor keys ( / ) to select
"Security Key" and press ENTER.
KEY
11
Use the cursor keys to enter the security key
on the wireless router (access point), and
press RETURN to previous state.
If you select "WEP" in Step 9, enter either 5 to 13
character string or 10 to 26 hexadecimal digits.
If you select "WPA2-PSK (AES)" or "Mixed Mode"
in Step 10, enter either 8 to 63 character string or 64
hexadecimal digits.
Use the remote control keys as described in Step 7 to
enter the key.
12
Use the cursor keys ( / ) to select
"Connect [ENT]" and press ENTER to save
the setting.
If "ERROR" appears, check the SSID and security
key on the wireless router (access point) and repeat
from Step 6.
If "ERROR" does not appear, the connection was
successful. Verify whether the unit is connected to a
wireless network (p. 19).
13
To exit from the menu, press SETUP.
Connecting to a network
17
En