Connecting The Network Cable; Preparing A Wireless Antenna; Connecting Power Cable; Turning On The Unit - Yamaha R-N402 Bedienungsanleitung

Connecting the network cable

Connect the unit to your router with a commercially-
available STP network cable (CAT-5 or higher straight
cable).
Internet
WAN
LAN
Modem
Router
Mobile device
(such as iPhone)
NETWORK
DIGITAL
OPTICAL
This unit (rear)

Preparing a wireless antenna

If you connect the unit wirelessly, erect the wireless
antenna. For information on how to connect the unit to a
wireless network, see "Connecting to network" (p. 14).
L E S S
W IR E
K
W O R
Note
Do not apply excessive force on the wireless antenna. Doing so
may damage the antenna.
Network Attached
Storage
(NAS)
PC
Network cable
ANTENNA
FM
75 AM
CD LINE

Connecting power cable

Plug the power cable into an AC wall outlet after all other
connections are complete.
CAUTION
Only for General and Brazil models:
Before connecting the power cable, make sure you set
VOLTAGE SELECTOR of this unit according to your
local voltage. Improper setting of VOLTAGE SELECTOR
may cause fire and damage to this unit.
MAINS
VOLTAGE SELECTOR
0 20 220 240 V
VOLTAGE SELECTOR
0 20 220 240 V

Turning on the unit

Press A (power) to turn on the unit.
DIMMER
A
COAXIAL
LINE 1
NET
TUNER
MODE
MEMORY
Connections
To the AC wall outlet
with the power cable
SLEEP
A
(power)
B
SPEAKERS
OPTICAL CD
LINE 2 LINE 3
USB BLUETOOTH
BAND DISPLAY
TUNING
PRESET
13
En