Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation examples
Top view (to install straight duct)
Connection cable (Accessory)
Side view (to install with straight duct)
Side view (to minimize the space with slope duct)
Top view (to install with bended duct)
Connection cable (Accessory)
Duct (Field supply)
Duct (Field supply)
Note
• The distance between the Lossnay unit and the Dx-coil
unit must be between 25 cm and 5 m when the duct is
straight.
• The length of connection cable (accessory) between the
two units is about 6 m. Please install the two units so that
the cable can be connected.
Note
• The duct between the two units can be bended like the
figure.
* To take the control cover off.
Eng-7
Werbung
Kapitel
Inhaltsverzeichnis
