Mitsubishi Electric GUG-01SL-E Installationsanleitung Seite 38

(2) Clock setting
[Button operation]
[1] Move the cursor with the F1 or F2 button to the desired item.
[2] Change the date and time with the F3 or F4 button, and press the SELECT button to save the
change. The change will be reflected on the clock display on the Main display.
Note: Clock setting is necessary for time display, weekly timer, timer setting and error history.
Make sure to perform clock setting when the unit is used for the first time or has not used
for a long time.
(3) Main display setting
Use the F3 or F4 button to select the display mode "Full" or "Basic." (The factory setting is "Full.")
Room
Cool Set temp.
Mode Temp.
Full mode (Example)
Note: This setting is only for the Main display. In the Basic mode, icons that indicate control status on timer and schedule
settings will not appear on the display. Vane, louver, and ventilation settings or room temperature will not appear, either.
(4) Display contrast
[Button operation]
Adjust LCD contrast with the F3 or F4 button.
The current level is indicated with a triangle.
Note: Adjust the contrast to improve viewing in different lighting conditions or installation
locations. This setting can not improve viewing from all directions.
(5) Remote controller display details setting
Make the settings for the remote-controller-related items as necessary.
Press the SELECT button to save the changes.
[1] Clock display
[Button operation]
· Select "Clock" from the remote controller display details setting screen, and press the F4 button
(Change) to bring up the clock display setting screen.
· Use the F1 through F4 buttons to select "Yes" (display) or "No" (non-display) and its format for
the Main display.
· Save the settings with the SELECT button.
(The factory settings are "Yes" (display) and "24 h" format. )
Clock display: Yes (Time is displayed on the Main display.)
No (Time is not displayed on the Main display.)
Display format: 24-hour format
12-hour format
AM/PM display (Effective when the display format is 12-hour): AM/PM before the time
Note: Time display format will also be reflected on the timer and schedule setting display. The time is displayed as shown below.
12-hour format: AM12:00 ~ AM1:00 ~ PM12:00 ~ PM1:00 ~ PM11:59
24-hour format:
[2] Temperature unit setting
[Button operation]
Move the cursor to the "Temperature" on the display details setting screen, and select the desired
temperature unit with the F3 or F4 button. (The factory setting is Centigrade (ÛC).)
· ÛC: Temperature is displayed in Centigrade. Temperature is displayed in 0.5- or 1-degree
increments, depending on the model of indoor units.
· ÛF: Temperature is displayed in Fahrenheit.
· 1 ÛC: Temperature is displayed in Centigrade in 1-degree increments. This item will not appear
on a sub remote controller.
Fri
Cool Set temp.
Auto
Fan Mode Temp.
Basic mode (Example)
0:00 ~ 1:00 ~ 12:00 ~
Fri
Auto
Fan
AM/PM after the time
13:00 ~ 23:59
– 11 –
Clock
yyyy/ mm/ dd
2012/ 01/ 01
Select:
Cursor
Main display
Full / Basic
Select:
Cursor
Contrast
Main menu:
Light
Display details
Clock No 24h
Temperature
Room temp. Yes
Auto mode Yes
Select:
Cursor
Clock display
Clock Yes
12h disp.
AM/PM disp.
Select:
Cursor
Display details
Clock No 24h
Temperature
Room temp. Yes
Auto mode Yes
Select:
Cursor
hh: mm
00: 00
Dark
/ 1
/ No
/ No
Change
No
Cursor
/ 1
/ No
/ No
Cursor