Hitachi DS 14DJL Bedienungsanleitung Seite 13

M ODIFICATIONS
Hitachi Pow er Tools are constantly being im proved
and m odified to incorporate the latest technological
advancem ents.
Accordingly, som e parts m ay be changed w ithout
prior notice.
Important notice on the batteries for the Hitachi
cordless pow er tools
Please alw ays use one of our designated genuine
batteries. We cannot guarantee the safety and
perform ance of our cordless pow er tool w hen
used w ith batteries other than these designated
by us, or w hen the battery is disassem bled and
m odified (such as disassem bly and replacem ent
of cells or other internal parts).
GUARANTEE
We guarantee Hitachi Pow er Tools in accordance w ith
statutory/country specific regulation. This guarantee does
not cover defects or dam age due to m isuse, abuse, or
norm al w ear and tear. In case of com plaint, please send
the Pow er Tool, undism antled, w ith the GUARANTEE
CERTIFICATE found at the end of this Handling instruction,
to a Hitachi Authorized Service Center.
NOTE
Due to HITACHI's continuing program of research and
developm ent, the specifications herein are subject to
change w ithout prior notice.
Information concerning airborne noise and vibration
The m easured values w ere determ ined according to
EN60745 and declared in accordance w ith ISO 4871.
M easured A-w eighted sound pow er level: 97 dB (A)
M easured A-w eighted sound pressure level: 86 dB (A)
Uncertainty Kp : 3 dB (A).
A
Wear hearing protection.
Vibration total values (triax vector sum ) determ ined
according to EN60745.
Drilling:
Vibration em ission value
Uncertainty K = 1.5 m /s 2
The declared vibration total value has been m easured in
accordance w ith a standard test m ethod and m ay be
used for com paring one tool w ith another.
It m ay also be used in a prelim inary assessm ent of
exposure.
WARNING
The vibration em ission during actual use of the pow er
tool can differ from the declared total value depending
on the w ays in w hich the tool is used.
a
D = 4.5 m /s
2
h,
Identify safety m easures to protect the operator that
are based on an estim ation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the tim es w hen the tool is
sw itched off and w hen it is running idle in addition to
the trigger tim e).
English
13