Technical Data - V2 CALYPSO series Handbuch

EU DECLARATION OF CONFORMITY
AND DECLARATION OF
INCORPORATION OF PARTLY
COMPLETED MACHINE
Declaration in accordance with Directives: 2014/35/UE (LVD);
2014/30/UE (EMC); 2006/42/CE (MD) ANNEX II, PART B
The manufacturer (*) V2 S.p.A., headquarters in Corso Principi di
Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
CALYPSO400-230V (*), CALYPSO500-230V (*)
CALYPSO600-230V (*)
CALYPSO400-120V (*), CALYPSO500-120V (*)
CALYPSO600-120V (*)
CALYPSO400-24V (*), CALYPSO500-24V (*)
CALYPSO600-24V (*)
Description: electromechanical actuator for gates
• is intended to be installed on gates, to create a machine
according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final
machinery into which it has to be incorporated has been
declared in conformity with the provisions of the Directive
2006/42/EC and 89/106/CE.
• is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Directive ROHS2 2011/65/CE

TECHNICAL DATA

m
Max. leaf lenght
Kg
Max. leaf weight
Vac - Hz
Power supply
A
Idling current
A
Full load current
W
Electric power
s
Opening time of the
leaf 0÷90°
µF
Capacitor
mm
Max travel
m/s
Operating speed
N
Maximum thrust
°C
Working temperature
IP
Protection
%
Working cycle
Kg
Motor weight
CALYPSO CALYPSO CALYPSO
400-230V 500-230V 600-230V
2,5 3 4
400 500 500
230 - 50 230 - 50 230 - 50
0,8 0,8 0,8
1,2 1,2 1,2
200 200 200
22 25 30
8 8 8
400 500 600
0,016 0,016 0,016
2300 2300 2300
-30 ÷ +50 -30 ÷ +50 -30 ÷ +50 -30 ÷ +50 -30 ÷ +50 -30 ÷ +50 -30 ÷ +50 -30 ÷ +50 -30 ÷ +50
44 44 44
30 30 30
6,5 6,8 7,1
The relevant technical documentation is available at the national
authorities' request after justifiable request to:
V2 S.p.A., Corso Principi di Piemonte 65, 12035, Racconigi (CN),
Italia
The person empowered to draw up the declaration and to provide
the technical documentation:
Antonio Livio Costamagna
Legal representative of V2 S.p.A.
Racconigi, il 01/06/2015
(*) made in extra EU Countries on behalf of V2 S.p.A.
CALYPSO CALYPSO CALYPSO
400-120V 500-120V 600-120V
2,5 3
400 500 500
120 - 60 120 - 60 120 - 60
2 2
2,8 2,8 2,8
300 300 300
22 25
25 25
400 500 600
0,018 0,018 0,018
2300 2300 2300
44 44
30 30
6,5 6,8 7,1
- 9 -
CALYPSO CALYPSO
400-24V 500-24V
4 2,5 3
300 400
24 Vdc 24 Vdc
2 2 2
10 10
- -
30 22 27
25 - -
400 500
- -
2000 2000
44 44 44
30 90 90
6,3 6,6
CALYPSO
600-24V
4
400
24 Vdc
2
10
-
35
8
600
-
2000
44
90
7,1