Devon & Devon WideBlues Montageanleitung Seite 13

ASSEMBLY INSTRUCTIONS
1)
After removing the metal components from the packaging, note
that there is a hole at the top of the leg (B) into which you need to
insert the riveted bar that sticks out of the bottom of the structure (A).
B
2)
Insert the leg onto the riveted
bar until the top of the leg
touches the bottom of the
structure.
3)
the allen screw attached to its
lower side, using the key
supplied (D).
Repeat these steps for both legs.
14
Hold the leg in place using
A