After Operation - Torqeedo Deep Blue Bedienungsanleitung

1

4.5 After operation

Switch motor and batteries off after each trip by turning the ignition
key to the left. Dark display indicates shut-down of the system.
When boat is not being operated and swimmers are in the vicinity of
the boat, ensure motor is completely switched off to avoid accidental
starting or engagement of motor.
• After use, always tilt the motor out of the water to ensure running-off
and draining of the cooling conduit and prevent corrosion, wear and
obstruction.
• After operation in salt or brackish water, rinse all components with
fresh water. Please do not use a high-pressure water blaster for
cleaning, as the water pressure may do harm.
• If you cannot tilt the motor entirely out of the water, we recommend
to apply additional corrosion protection in the form of zinc savers,
galvanic isolation or a grounded sacrificial anode directly on the jetty.
Warnings and errors
2
1 Warnings and errors
display
Display of system
2
software version
(no error message)
53