Intended Use; Installing The Refrigerator-Oven Combination; Preparing The Installation - Dometic REFRIGERATION 9 serie Montageanleitung

Intended use

5 Intended use
This refrigerator-oven combination is designed for installation in caravans or motor-
homes.
The refrigerator is only suitable for cooling, freezing and storing foodstuffs. The
refrigerator is not intended for the proper storage of medicine.
The refrigerator is designed to be operated on a DC power supply and an AC socket
and can be independently powered by liquid gas (propane or butane). The refriger-
ator may not be run on natural gas or city gas.
The oven is only suitable for cooking and baking foodstuffs.
The oven is designed to be run on liquid gas (propane or butane). The oven may not
be run on natural gas or city gas.
6 Installing the refrigerator-oven
combination
6.1

Preparing the installation

When installing the refrigerator-oven combination, note the following:
• To enable the refrigerant to circulate properly, the refrigerator may not exceed an
angle of 3°.
To do this, park the vehicle on a level surface and check to see if the ice-cube tray
is flat in the refrigerator.
• The refrigerator-oven combination must be installed so that it is easily accessible
for service work, easy to de-install and install, and easily removed from the
vehicle.
• The distance between the refrigerator-oven combination and the rear wall must
be min. 15 mm – max. 25 mm.
• The refrigerator-oven combination must be installed in a recess so that it stands
firm when the vehicle is in motion. Note the following dimensions here
(H x W x D in mm):
– RMLT9330/9331/9335: 1605 x 420 x 615 (fig. 1, page 3)
– RMLT9430/9431/9435: 1605 x 468 x 555 (fig. 2, page 3)
18
RMLT9xxx
EN