Installing The Refrigerator-Oven Combination In A Draught-Free Location - Dometic REFRIGERATION 9 serie Montageanleitung

Installing the refrigerator-oven combination
• The refrigerator-oven combination must be installed in a draught-proof location
in accordance with EN 1949, see chapter "Installing the refrigerator-oven combi-
nation in a draught-free location" on page 20.
6.2 Installing the refrigerator-oven combination in a
draught-free location
Gas-powered refrigerators in caravans or motorhomes must be installed in a
draught-free location according to EN 1949. This means that the combustion air is
not extracted from the interior and the exhaust fumes are prevented from directly
entering the living space.
A suitable seal must be fitted between the rear panel of the refrigerator-oven combi-
nation and the interior of the vehicle.
!
WARNING! Fire hazard!
• Do not use flammable materials such as silicone sealants, foam or
similar for the draught-proof installation.
• Use materials that are resistant to temperatures of up to 200 °C in the
vicinity of the oven.
The manufacturer recommends using a flexible seal to ease removal and installation
for maintenance purposes.
➤ Attach the sealing lips (fig. 7 1, page 6) to a stop rail behind the refrigerator-
oven combination, for example, by using an adhesive.
➤ When installing, push the refrigerator-oven combination against the stop rails
with the sealing lips. This then seals the space behind the refrigerator to the inte-
rior of the vehicle.
6.3 Making air inlet and outlet vents
I
NOTE
At high ambient temperatures, the refrigerator can only provide its
maximum cooling capacity if the optimum ventilation has been
provided.
➤ Make an air inlet vent and an air outlet vent in the outer wall with the size of
410 mm x 249 mm. When doing so, observe the information, see chapter "Pre-
paring the installation" on page 18.
20
RMLT9xxx
EN