Initial Start-Up; Setting Up And Switching On - Waeco AirCon Service Center ASC2500 Bedienungsanleitung

ASC2500
7

Initial start-up

7.1

Setting up and switching on

1. Wheel the AirConServiceCenter to the workplace and lock the front
wheels (9).
I
NOTE
During operation, the device must be on a horizontal, flat surface so that
measurements can be made correctly.
2. Connect the AirConServiceCenter to the mains.
3. To switch it on, set the main switch (20) to I.
The software version number appears in the display (6) for several
seconds:
"SW": Software status
"DB": Database
"SN": Series number
✓ The AirConServiceCenter then runs a software test.
✓ When the start-up procedure is complete, the AirConServiceCenter
displays the following:
EN
WAECO INTERNATIONAL
ASC 2500
Software test.
Please wait
Refrigerant
PAG oil
UV tracer
11:56:35
SW x.xx
DB x.xx
SN 000000
g. 4820
ml 375
ml 313
10/03/11
Initial start-up
67