Precipitation; Hi/Lo Alert - National Geographic Colour Weather Center 5-in-1 Bedienungsanleitung

22 Precipitation

The precipitation which was collected over a certain period is displayed on the base station in milli-
meters or inches and is based on the current precipitation rate.
Rainfall rate
Select display mode
Press the RAIN button several times until the desired time range is displayed:
RATE
DAILY
WEEKLY
MONTHLY
Select measurement unit (millimeters or inch)
1. Press the RAIN button for approx. 3 seconds to change to measurement unit settings.
2. Press UP or DOWN button to change between mm (millimeters) and in (inch).
3. Finally press the RAIN button to save the settings and exit the setting mode.
NOTICE! Readings are updated automatically every 6 minutes.

23 HI/LO Alert

HI/LO alert are used to alert you of certain weather conditions. Once activated, an alarm sound is
triggered and the alert icon flashes as soon as a set value is reached. Supported areas and alarm
types:
Area
Indoor temperature
Indoor humidity
Outdoor temperature
Outdoor humidity
Rainfall (daily)
Wind speed
HI AL = High alert / LO AL = Low alert
*Daily rainfall since midnight
HI/LO alert setting
1. Press ALERT button until the desired area is selected.
2. Press UP or DOWN button to change the value.
3. Press ALERT button to confirm and continue to the next setting.
Enable/Disable HI/LO Alert
4. Press ALERT button until the desired area is selected.
5. Press ALARM button, to activate the alarm.
6. Press ALERT button to confirm and continue to the next setting.
Daily rainfall
Current precipitation rate in the past hour
Total precipitation rate of the current day, measured from midnight
Total precipitation rate of the current week
Total precipitation rate of the current month
Weekly rainfall
Type of alert available
HI AL / LO AL
HI AL / LO AL
HI AL / LO AL
HI AL / LO AL
HI AL*
HI AL
Monthly rainfall
37 / 48