Resistance Measurement; Continuity Test - TESTBOY Pocket 100 Bedienungsanleitung

Resistance measurement

In order to measure the resistance values, rotate the selector switch (3) to the position Ω o)))
and place the measurement probes on the test object. The multimeter automatically sets itself to
the most favourable measurement range.
Range Resolution
600 Ω 0.1 Ω
6 kΩ 1 Ω
60 kΩ 10 Ω
600 kΩ 100 Ω
6 MΩ 1 kΩ
60 MΩ 10 kΩ

Continuity test

In order to test low impedance continuity, press the Select button (2) with the selector switch (3)
at the position Ω o)))
A beep is emitted if the resistance values are less than 50 Ω.
Range Resolution
Beep 0.1 Ω
®
Testboy Pocket 100
Accuracy
± 1.2 %
+5 digits
± 2.0 %
+10 digits
.
Overvoltage
protection
250 VAC
RMS
Overvoltage Measuring
protection
250 VAC
RMS
Test voltage Test current
1.0 V
Operation
voltage
1.2 V
0.5 mA
23