Delivery Inventory - Makita UC3030A Betriebsanleitung

Delivery inventory

EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Chain Saw
Model No./ Type: UC3030A, UC3530A, UC4030A,
UC4530A, UC3530AP, UC4030AP
are of series production and
Conforms to the following European Directives:
2000/14/EC, 98/37/EC until 28th December 2009
and then with 2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 101.8 dB
Guaranteed Sound Power Level: 103 dB
30th January 2009
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
12
1
5
Director
1. Electric chain saw
2. Guide bar
4 3. Saw chain
4. Cord grip for electric cord
5. Chain protection cover
6. Instruction manual (not shown)
In the case that one of the parts listed should not be
included in the delivery inventory, please, consult your
sales agent.
Intended use
Electric saws
This electric saw may be used only for sawing wood.
It is intended for occasional use in thin wood, caring
for fruit trees, felling, removing limbs, and trimming to
length.
Persons who may not sue the saw:
This saw must not be used by persons who are not
familiar with this instruction manual, children, young
people, or anyone under the influence of alcohol, drugs
or medication.
Chain saw safety warnings:
or familiarity with product (gained from repeated
use) replace strict adherence to chain saw safety
rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything. A moment of
inattention while operating chain saws may cause
entanglement of your clothing or body with the saw
chain.
2. Always hold the chain saw with your right hand
on the rear handle and your left hand on the
front handle. Holding the chain saw with a reversed
hand configuration increases the risk of personal
injury and should never be done.
3. Wear safety glasses and hearing protection.
Further protective equipment for head, hands,
legs and feet is recommended. Adequate
protective clothing will reduce personal injury by
flying debris or accidental contact with the saw
chain.
4. Do not operate a chain saw in a tree. Operation
of a chain saw while up in a tree may result in
personal injury.
2
3
DO NOT let comfort