Proklima FN-114507.1 Bedienungsanleitung Seite 63

pipe, and tighten them up with gaskets and nuts. At last, tighten the two screws (a) up in the U tube.
3. Control panel assembly
First insert the screw through the holes of the height adjustment pipe, and then screw into the back hole of

the control panel to tighten it to the height adjustment pipe.
OPERATION
Please press the control panel to choose your desired functions.
1. ON/SPEED: Connect the appliance to a suitable power source. Then press ON/SPEED button to turn the
appliance on.
1) If the unit is turned on at the first time, it will work with the following presetting:
Speed: low / Mode: normal / Timer: off
2) If the unit is working, press ON/SPEED button to adjust the speed. It will work as below:
Low → Mid → High → Low ... (repeating).
Tilting Angles: turn off and unplug the fan, then push or pull the guards to adjust the angle of airflow.
2. MODE: Press the MODE button in the remote control to choose the functions from normal →Nature → Sleep
→ normal ... (Repeating).
1) Normal: under this mode, the motor works with the preset speed and the indicator light of NORMAL is
on. You can press the ON/SPEED button to choose the speed Low /Mid /High.
2) Nature: under this mode, the indicator light of NATURE is on. The appliance runs according to the natural
mode program. Generating softer and more comfort air volume, you feel like the wind from the nature.
You can press the speed button to choose Low /Mid /High natural wind.
3) Sleep: under this mode, the indicator light of SLEEP is on. The appliance runs according to the sleeping
mode program. Air volume will weaken with the decrease of body temperature when you fall asleep,
which will protect you from catching cold. You can press the speed button to choose Low /Mid /High
sleeping wind.
3. TIMER: Press this button to set your desired working time from 0.5h →1h →1.5h →... →7.5h→off → 0.5h ...
(Repeating). When the set time has elapsed, the fan will be off and under standby condition.
4. OFF: Press this button and all functions and the display will be off. The unit will be at standby condition.
CLEANING
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 120W
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased. They can
take this product for environmental safe recycling.
- 62 -